Settings

Register IP speakers and IP audio modules to BLAZE and configure their detailed settings.

Registering a speaker

For instructions on registering a speaker to BLAZE, see Adding a device.

Speakers are displayed with the icon.

Note: To register an IP speaker, the IP speaker must be set to speaker mode.

To adjust the speaker volume

Adjust the speaker output volume.
  1. Click Settings > Devices.
  2. Select the speaker from the device list on the Device settings page.
  3. In the Device settings panel, click the Webpage tab.
  4. Enter the ID and password for the speaker device's webpage.
  5. Select Operation Setting > Audio Setting, then in the Operation Information section adjust the slider in Volume to the desired level and click Apply.